UM1539 datasheet(6/46 Pages) STMICROELECTRONICS

tên linh kiện	UM1539

Giải thích chi tiết về linh kiện	STEVAL-IFS017V1 multi device temperature sensor and RTC demo

PDF	46 Pages

Scroll/Zoom	100%

nhà sản xuất	STMICROELECTRONICS [STMicroelectronics]

Trang chủ	http://www.st.com

Logo

6 / 46 page

Getting started

UM1539

6/46

Doc ID 023106 Rev 1

Getting started

1.1

Package

The contents of the complete package are as follows:

Hardware content:

–

Demonstration board: STEVAL-IFS017V1

Documentation:

–

User manual (this document)

–

Schematics, Gerber files, BOM

Firmware:

–

Already programmed STM32F102xx device soldered on the demo board

GUI installation file.

1.2

System setup

The steps for starting the demo board are as follows:

Install the GUI .exe in the computer. The user should have administrator rights for the

computer to install the GUI.

Connect the USB cable between the computer and USB connector on the STEVAL-

IFS017V1 (CN4).

LED D3 should glow on the motherboard.

Opening the GUI shows the connected status in the bottom left corner of the window.

The daughter card power selection and feature demonstration is discussed in the following

sections.

Figure 2.

Temperature sensor GUI connected

AM12155v1

GUI selection button

UM1539 bảng dữ liệu(PDF) 6 Page - STMicroelectronics