HAL855 datasheet(20/102 Pages) MICRONAS

20 / 102 page

HAL8xy, HAL100x

APPLICATION NOTE

Programmer Board

Sept. 19, 2013; APN000046_03EN

Micronas

Examples:

(Blanks are given for better readability only)

–power on:

STX n ETX

– set bit time slow CHR$(85) = ’U’:

STX z U ETX

– read register no. 2:

STX q 2 0 2 1 ETX

– write register no. 2:

STX e 3 1 2 1 0 0 0 A 1 ETX

– store sequence:

STX u CHR$(200) ETX (set programming time)

STX m 5 1 1 1 ETX (ERASE)

STX m 4 0 1 1 ETX (PROM)

– deactivate sensors:

STX e 3 1 F 0 0 8 0 F 0 ETX

– select sensor A:

STX a CHR$(25) ETX

– lock sensors

STX u CHR$(200) ETX (set programming time)

STX l 7 0 6 0 5 1 1 1 ETX (LOCK-ERASE)

4.2.1.

Monitoring of the Programming Voltage

In case of ERASE, PROM, and LOCK, the programming pulse voltage is measured by

the board, and a data string is sent back to the PC. The relation between the data and

the programming voltage is

If the programming pulse voltage is out of the specification limits, the status bit is set to

“1”.

Examples:

–VPROG = 12.15 V, Data board PC:

STX 1 0 D 0 A 0 ETX

(DAT = 0 D 0 A)

–VPROG = 12.50 V, Data board PC:

STX 0 0 D 6 9 0 ETX

(DAT = 0 D 6 9)

PROG

DAT

4095

------------ 6 2.485 V



HAL855 bảng dữ liệu(PDF) 20 Page - Micronas

HAL855 bảng dữ liệu(HTML) 20 Page - Micronas

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL