| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
PIC18F4331 bảng dữ liệu(PDF) 173 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC18F4331 bảng dữ liệu(HTML) 173 Page - Microchip Technology |
|
173 / 396 page ![]() 2003 Microchip Technology Inc. Preliminary DS39616B-page 171 PIC18F2331/2431/4331/4431 16.2.1 QEI CONFIGURATION The QEI module shares its input pins with the Input Capture module. The inputs are mutually exclusive; only the IC module or the QEI module (but not both) can be enabled at one time. Also, because the IC and QEI are multiplexed to the same input pins, the programmable noise filters can be dedicated to one module only. The operation of the QEI is controlled by the QEICON configuration register. See Register 16-2. REGISTER 16-2: QEICON: QUADRATURE ENCODER INTERFACE CONTROL REGISTER Note: In the event that both QEI and IC are enabled, QEI will take precedence and IC will remain disabled. R/W-0 R/W-0 R-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 VELM ERROR UP/DOWN QEIM2 QEIM1 QEIM0 PDEC1 PDEC0 bit 7 bit 0 bit 7 VELM: Velocity Mode bit 1 = Velocity mode disabled 0 = Velocity mode enabled bit 6 ERROR: QEI error bit(1) 1 = Position counter(4) overflow or underflow 0 = No overflow or underflow bit 5 UP/DOWN: Direction of Rotation Status bit(1) 1 =Forward 0 = Reverse bit 4-2 QEIM2:QEIM0: QEI Mode bits(2,3) 111 =Unused 110 =QEI enabled in 4x Update mode; position counter reset on period match (POSCNT = MAXCNT) 101 =QEI enabled in 4x Update mode; INDX resets the position counter 100 =Unused 010 =QEI enabled in 2x Update mode; position counter reset on period match (POSCNT = MAXCNT) 001 =QEI enabled in 2x Update mode; INDX resets the position counter 000 =QEI off bit 1-0 PDEC1:PDEC0: Velocity Pulse Reduction Ratio bit 11 =1:64 10 =1:16 01 =1:4 00 =1:1 Note 1: QEI must be enabled and in Index mode. 2: QEI mode select must be cleared (= 000) to enable CAP1, CAP2 or CAP3 inputs. If QEI and IC modules are both enabled, QEI will take precedence. 3: Enabling one of the QEI operating modes remaps the IC buffer registers CAP1BUFH, CAP1BUFL, CAP2BUFH, CAP2BUFL, CAP3BUFH and CAP3BUFL as the VREGH, VREGL, POSCNTH, POSCNTL, MAXCNTH, and MAXCNTL registers (respectively) for the QEI. 4: ERROR bit must be cleared in software. Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = bit is set ‘0’ = bit is cleared x = bit is unknown |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |