MLX75305

Datasheet

Page 11 of 12

REVISION 9 - OCTOBER 17, 2016

[390107530501]

13. Standard Information

Our products are classified and qualified regarding soldering technology, solderability and moisture

sensitivity level according to standards in place in Semiconductor industry.

For further details about test method references and for compliance verification of selected soldering

method for product integration, Melexis recommends reviewing on our web site the General

Guidelines soldering recommendation. For all soldering technologies deviating from the one mentioned in

above document (regarding peak temperature, temperature gradient, temperature profile etc), additional

classification and qualification tests have to be agreed upon with Melexis.

For package technology embedding trim and form post-delivery capability, Melexis recommends to consult

the dedicated trim&form recommendation application note: lead trimming and forming recommendations

Melexis is contributing to global environmental conservation by promoting lead free solutions. For more

information on qualifications of RoHS compliant products (RoHS = European directive on the Restriction Of

the

use

of

certain

Hazardous

Substances)

please

visit

the

quality

page

on

our

website: http://www.melexis.com/en/quality-environment

14. ESD Precautions

Electronic semiconductor products are sensitive to Electro Static Discharge (ESD).

Always observe Electro Static Discharge control procedures whenever handling semiconductor products.

15. Disclaimer

The information furnished by Melexis herein is believed to be correct and accurate. Melexis disclaims (i) any and all

liability in connection with or arising out of the furnishing, performance or use of the technical data or use of the

product as described herein, (ii) any and all liability, including without limitation, special, consequential or incidental

damages, and (iii) any and all warranties, express, statutory, implied, or by description, including warranties of fitness

for particular purpose, non-infringement and merchantability. No obligation or liability shall arise or flow out of

Melexis’ rendering of technical or other services.

The information contained herein is provided "as is” and Melexis reserves the right to change specifications and/or

any other information contained herein at any time and without notice. Therefore, before placing orders and/or prior

to designing this product into a system, users or any third party should obtain the latest version of the relevant

information to verify that the information being relied upon is current. This document supersedes and replaces all

prior information regarding the product(s) as described herein and/or previous versions of this document.

Users or any third party must further determine the suitability of the Melexis’ product(s) described herein for its

application, including the level of reliability required and determine whether it is fit for a particular purpose.

The information contained herein is proprietary and/or confidential information of Melexis. The information contained

herein or any use thereof does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other

intellectual property rights, whether with regard to such information itself or anything described by such information.

This document as well as the product(s) described herein may be subject to export control regulations. Please be

aware that export might require a prior authorization from competent authorities.