| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MIC2128 bảng dữ liệu(PDF) 26 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MIC2128 bảng dữ liệu(HTML) 26 Page - Microchip Technology |
|
26 / 32 page ![]() MIC2128 DS20005620A-page 26 2016 Microchip Technology Inc. 6.0 PCB LAYOUT GUIDELINES PCB layout is critical to achieve reliable, stable and efficient performance. The following guidelines should be followed to ensure proper operation of the MIC2128converter. 6.1 IC • The ceramic bypass capacitors, which are con- nected to the VDD and PVDD pins, must be located right at the IC. Use wide traces to connect to the VDD, PVDD and AGND, PGND pins respectively. • The signal ground pin (AGND) must be connected directly to the ground planes. • Place the IC close to the point-of-load (POL). • Signal and power grounds should be kept separate and connected at only one location. 6.2 Input Capacitor • Place the input ceramic capacitors as close as possible to the MOSFETs. • Place several vias to the ground plane close to the input capacitor ground terminal. 6.3 Inductor • Keep the inductor connection to the switch node (SW) short. • Do not route any digital lines underneath or close to the inductor. • Keep the switch node (SW) away from the feed- back (FB) pin. • The SW pin should be connected directly to the drain of the low-side MOSFET to accurately sense the voltage across the low-side MOSFET. 6.4 Output Capacitor • Use a copper plane to connect the output capacitor ground terminal to the input capacitor ground terminal. • The feedback trace should be separate from the power trace and connected as close as possible to the output capacitor. Sensing a long high-current load trace can degrade the DC load regulation. 6.5 MOSFETs • MOSFET gate drive traces must be short and wide. The ground plane should be the connection between the MOSFET source and PGND. • Chose a low-side MOSFET with a high CGS/CGD ratio and a low internal gate resistance to minimize the effect of dv/dt inducted turn-on. • Use a 4.5V VGS rated MOSFET. Its higher gate threshold voltage is more immune to glitches than a 2.5V or 3.3V rated MOSFET. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |