B2

Simple Assembly Type PC Card Frame Kits

NX1 Series

Simple Assembly Method

sFeatures

1. Great reduction of the number of frame kit

assembly steps

Use of this simple assembly method has greatly reduced the

number of assembly steps. Processes such heat fusion and

cooling of the covers are no longer required. Assembly of the

frame kit is possible using simple jig tools. (See the Simple

Assembly Method insert to the right.).

2. Excellent Shielding Qualities

The covered construction using a metal panel out to the sides of

the card provide excellent shielding qualities. (See Figure 4.)

3. Board Offset

Available in types with board offsets of 0.3mm and 0.9mm.

4. Back connectors

Back Connectors available with 15,25, and 32 contacts.

5. Can Be Used With CardBus Types

6. Stable Conduction Maintained Between Panels

The spring quality of the metal ensures stable conduction to be

maintained between the panels at the panel lock portion.

7. Conduction Maintained Between Panel and Board

The cunduction between panel and board is maintained by

contact between the panel and a one-body ground spring.

sApplications

A wide variety of PC cards including LAN, FAX modem, and

SCSI.

Figure 1

Figure 4

Figure 3

Figure 2

Frame+Metal panel

68-contact socket

Back connector

Metal panel covers all the

way to the card sides

(For details, see the frame Kit assembly procedure on page 6)