LP5907 datasheet(4/36 Pages) TI1

4 / 36 page

LP5907

SNVS798J – APRIL 2012 – REVISED MARCH 2016

www.ti.com

Product Folder Links: LP5907

Submit Documentation Feedback

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating

Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

All voltages are with respect to the GND pin.

(3)

Abs Max VOUT is the lessor of VIN + 0.3 V, or 6 V.

(4)

Internal thermal shutdown circuitry protects the device from permanent damage.

6 Specifications

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)

(1) (2)

MIN

MAX

UNIT

VIN

Input voltage

–0.3

VOUT

Output voltage

–0.3

See(3)

VEN

Enable input voltage

–0.3

Continuous power dissipation(4)

Internally Limited

TJMAX

Junction temperature

150

°C

Tstg

Storage temperature

–65

150

°C

(1)

JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(2)

JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

6.2 ESD Ratings

VALUE

UNIT

V(ESD)

Electrostatic discharge

Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)

±2000

Charged-device model (CDM), per JEDEC specification JESD22-C101(2)

±1000

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating

Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

All voltages are with respect to the GND pin.

(3)

In applications where high power dissipation and/or poor package thermal resistance is present, the maximum ambient temperature may

have to be derated. Maximum ambient temperature (TA-MAX) is dependent on the maximum operating junction temperature (TJ-MAX-OP =

125°C), the maximum power dissipation of the device in the application (PD-MAX), and the junction-to ambient thermal resistance of the

part/package in the application (RθJA), as given by the following equation: TA-MAX = TJ-MAX-OP – (RθJA × PD-MAX). See Applications and

Implementation.

6.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)

(1) (2)

MIN

MAX

UNIT

VIN

Input supply voltage

2.2

5.5

VEN

Enable input voltage

5.5

IOUT

Output current

250

Junction temperature

–40

125

°C

Ambient temperature(3)

–40

°C

LP5907 bảng dữ liệu(PDF) 4 Page - Texas Instruments

LP5907 bảng dữ liệu(HTML) 4 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

bảng dữ liệu tải về

Link URL