VS6663CB datasheet(38/64 Pages) STMICROELECTRONICS

38 / 64 page

Video data interface

VS6663CB

38/64

Doc ID026749 Rev 2

Dummy pixel data

This is invalid pixel data. The receiver should always ignore dummy pixel data. The

VS6663CB has 0 dummy columns.

Visible pixel data

The visible pixels contain valid image data.The correct integration time and analog gain for

the visible pixels is specified in the blank lines at the start of the frame.The number of visible

pixels can be varied with the requested frame size.

Dark pixel data (light shielded pixels)

The VS6663CB has 0 dark pixels.

Black pixel data (zero integration time)

The VS6663CB has 0 black pixels.

Manufacturer specific pixel data

The VS6663CB has 0 manufacturer specific pixels.

Interline padding/line blanking

During interline padding all bits in the data stream in a CCP2 frame are set to 1.

In a CSI-2 frame there is no concept of line blanking being transmitted, the sensor will

simply spend a longer time in the LP state between active line data.

Interframe padding / frame blanking

During interframe padding all bits in the data stream in a CCP2 frame are set to 1.

In a CSI-2 frame there is no concept of frame blanking being transmitted, the sensor will

simply spend a longer time in the LP state at the end of the active data for a frame.

VS6663CB bảng dữ liệu(PDF) 38 Page - STMicroelectronics