| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
ST-PLC-AFE bảng dữ liệu(PDF) 10 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST-PLC-AFE bảng dữ liệu(HTML) 10 Page - STMicroelectronics |
|
10 / 58 page ![]() General description ST-PLC-AFE 10/58 DocID028727 Rev 1 Figure 4. Tx chain with different coupling capacitor If using CENELEC band A, it is recommended to use a 2.2 nF capacitor. For CENELEC bands B, C, and D, a 1 nF can be used. 2.1.2 Power amplifier power management When the transmitter is not in use, the outputs can be disabled and placed into a high- impedance state. This is achieved by setting the PA_EN bit in the Enable register to 0. A description of energy consumption following sub-block activation through the internal registers is given in Section 10.7: ST-PLC-AFE consumption (no load). The PA integrates a current limiter that is programmable by an internal register thanks to the SPI communication. The current limit is set by the CL bits in the Gain register. Four limits are available: 0.5 A, 1 A, 1.5 A, and 2.1 A. See Section 9.3.1: Overcurrent condition for overcurrent protection. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |