C161PI datasheet(2/82 Pages) INFINEON

2 / 82 page

Edition 1999-07

Published by Infineon Technologies AG i. Gr.,

St.-Martin-Strasse 53

D-81541 München

Attention please!

The information herein is given to describe certain components and shall not be considered as warranted characteristics.

Terms of delivery and rights to technical change reserved.

We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and

charts stated herein.

Infineon Technologies is an approved CECC manufacturer.

Information

For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office

in Germany or our Infineon Technologies Representatives worldwide (see address list).

Warnings

Due to technical requirements components may contain dangerous substances. For information on the types in question please contact

your nearest Infineon Technologies Office.

Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Tech-

nologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect

the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to

support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other

persons may be endangered.

The C161PI is the successor of the C161RI. Therefore this data sheet also replaces the C161RI

data sheet (see also revision history).

C161PI

Revision History:

1999-07 Preliminary

Previous Versions:

1998-05

(C161RI / Preliminary)

1998-01

(C161RI / Advance Information)

1997-12

(C161RI / Advance Information)

Page

Subjects

---

3 V specification introduced

4, 5, 7

Signal FOUT added

XRAM description added

Unlatched CS description added

Block Diagram corrected

Description of divider chain improved

25, 51, 52

ADC description updated to 10-bit

36, 37

Revised description of Absolute Max. Ratings and Operating Conditions

39, 44

Power supply values improved

45 - 50

Revised description for clock generation including PLL

54 ff.

Standard 25-MHz timing

We Listen to Your Comments

Any information within this document that you feel is wrong, unclear or missing at all?

Your feedback will help us to continuously improve the quality of this document.

Please send your proposal (including a reference to this document) to:

mcdocu.comments@infineon.com

C161PI bảng dữ liệu(PDF) 2 Page - Infineon Technologies AG

C161PI bảng dữ liệu(HTML) 2 Page - Infineon Technologies AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82

bảng dữ liệu tải về

Link URL