L9663 datasheet(73/104 Pages) STMICROELECTRONICS

73 / 104 page

DocID028693 Rev 1

73/104

L9663

Communication interface

103

STRS

Self-Test Setting - run time

Address:

101101

Type:

R/W

Description:

– slot2 sensor data -> slot1 sensor data

– slot4 sensor data ->slot3 sensor data

– slot6 sensor data ->slot5 sensor data

Default value:

0000000000000000

R/W

[15] RESERVED

[14] FSIDM: Force SID mismatch

0: NOP

1: the behavior of the MUX which selects SID, CRC/parity and Number of bits, is changed

according to the following table:

slot1 <-->slot2

slot3<-->slot4

slot6<-->slot5

[13] FTSIDM: Force TSID mismatch

0: NOP

1: the behavior of MUX that selects sensor data (and SID) for each time slot is modified in this

way:

Sensor data of time slots 1, 3 and 5 keep a buffer empty value.

[12:6] RESERVED

[5] ACCT: Abort cross-coupling test

0: NOP

1: Stop cross-coupling test immediately

[4:3] SCCT: Start cross-coupling test

11: ignored

01: start cross-coupling test in master mode

10: start cross-coupling test in slave mode

[2:1] RESERVED

[0] TBEC: Test buffer empty check

0 : after a read operation 1F0 is written into the buffer (normal operation)

1 : after a read operation old data are left In the buffer

L9663 bảng dữ liệu(PDF) 73 Page - STMicroelectronics

L9663 bảng dữ liệu(HTML) 73 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL