H7CX-R11W-N datasheet(41/56 Pages) OMRON

41 / 56 page

H7CX-R

@-N

Nomenclature

Dimensions

(Unit: mm)

Tachometers

(Factory setting)

(Enable)

(Factory setting) OFF

(Disable)

10 mm

6 mm

1. Hold Indicator (orange)

2. Key Protect Indicator (orange)

3. Control Output Indicator (orange)

4. Comparison Value 1, 2 Stage Indicator

(1-output models)

(2-output models)

Lit when the key protect switch is ON.

(Lit when the hold input or hold key is ON. )

7. Mode Key

(Used to switch mode and setting items.)

11. DIP Switch

5. Present Value (Main Display)

8. Hold Key

9. Up Keys

Character height: 10 mm (red)

(Used to sustain the measurement value and output.)

6. Comparison Value (Sub-display)

Character height: 6 mm (green)

10. Key-protect Switch

1st digit

6th digit

Display Section

Operation Keys

Switches

Character Size

for Sub-display

Character Size

for Main Display

OFF

12345678

OUT

63.7

14.4

44.8

× 44.8

× 48

Dimensions without Flush Mounting Adapter

H7CX-R

@-N

Note:

The mounting panel thickness should be 1 to 5 mm.

To allow easier operation, it is recommended that

Adapters be mounted so that the gap between

sides with hooks is at least 15 mm (i.e., with the

panel cutouts separated by at least 60 mm).

It is possible to mount counters side by side, but

only in the direction without the hooks. If Counters/

Tachometers are mounted side by side, however,

water resistance will be lost.

60 min.

15 min.

+0.6

−0

+0.6

−0

n side by side mounting

With Y92A-48F1 attached.

With Y92A-48 attached.

A=(48n

−2.5)

−0

A=(51n

−5.5) +1

−0

A={48n

−2.5+(n−1)×4} +1

−0

Panel Cutouts

Panel cutouts are as shown below

(according to DIN43700).

89.9

7.5

Panel

(51)

Y92S-29 (order separately)

Waterproof Packing

Y92F-30 (order separately)

Flush Mounting Adapter

P3GA-11

(order

separately)

Rear Surface

Connection

Socket

Dimensions with Flush Mounting Adapter (Adapter and

Waterproof Packing Ordered Separately)

H7CX-R

@-N

H7CX-R

@-N

P2CF-11(-E) (order separately)

Front Connecting Socket

100.9

103.2*

Dimensions with Front Connecting Socket

H7CX-R

@-N

* These dimensions vary with the kind of DIN track (reference value).

H7CX-R11W-N bảng dữ liệu(PDF) 41 Page - Omron Electronics LLC

H7CX-R11W-N bảng dữ liệu(HTML) 41 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

bảng dữ liệu tải về

Link URL