AX8052F151 datasheet(30/51 Pages) ONSEMI

30 / 51 page

Circuit Description

www.onsemi.com

AX8052F151

5.2. Timer, Output Compare and Input Capture

The AX8052F151 features three general purpose 16-bit timers. Each timer can be clocked by the

system clock, any of the available oscillators, or a dedicated input pin. The timers also feature a

programmable clock inversion, a programmable prescaler that can divide by powers of two, and an

optional clock synchronization logic that synchronizes the clock to the system clock. All three

counters are identical and feature four different counting modes, as well as a Σ∆ mode that can be

used to output an analog value on a dedicated digital pin only employing a simple RC lowpass

filter.

Two output compare units work in conjunction with one of the timers to generate PWM signals.

Two input capture units work in conjunction with one of the timers to measure transitions on an

input signal.

For software timekeeping, two additional 16-bit wakeup timers with 4 16-bit event registers are

provided, generating an interrupt on match events.

5.3. UART

The AX8052F151 features two universal asynchronous receiver transmitters. They use one of the

timers as baud rate generator. Word length can be programmed from 5 to 9 bits.

5.4. SPI Master/Slave Controller

The AX8052F151 features a master/slave SPI controller. Both 3 and 4 wire SPI variants are

supported. In master mode, any of the on-chip oscillators or the system clock may be selected as

clock source. An additional prescaler with divide by two capability provides additional clocking

flexibility. Shift direction, as well as clock phase and inversion, are programmable.

AX8052F151 bảng dữ liệu(PDF) 30 Page - ON Semiconductor