| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
UPD6466GS bảng dữ liệu(PDF) 47 Page - NEC |
|
|
|||||||||||||||||||||||||||||
UPD6466GS bảng dữ liệu(HTML) 47 Page - NEC |
|
47 / 70 page ![]() 47 µPD6466 (2) With LSB first (Use of each bit is the same as (1). The command is input from LSB (D0).) (LSB) (MSB) D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 D14 D15 VC2 RB B G R RV 1 1 C0C1C2C3C4C5C6C7 • Character specification Specify the addresses of the 256 types of characters in each bank. Note, however, that addresses FEH and FFH are respectively fixed to Display Off Data and a 2-byte successive command end code (these addresses are also fixed when characters are changed by using a mask code option, and no characters can be stored to these addresses). The design of the characters can be created by using a mask code option. •VC2 output specification The character output from the VC2 pin can be specified in character units. The character specified by VC2 is not output from the RGB output or VC1 output channel (this specification is invalid when RGB + RGB compatible BLK output selected). • Blinking control (character units)Note Whether the character written to the video RAM blinks is specified in character units. Blinking is turned ON/OFF in screen units by using the character display control command (refer to 3.2 Display Control Command). • Left to right reverse character specificationNote Left to right reverse can be turned ON/OFF in character units (this specification is valid when left and right reverse is turned ON by the display control command). Note Character blinking or character left to right reverse, whichever selected by the initial setting command, is valid. • Character color control A character color can be set in units of one character (valid for RGB output only. The color is fixed for the VC1 and VC2 output). • Character color reverse specification It can be specified whether the color of a character can be reversed or not, in character units. Turning ON/ OFF the character color reverse is specified in screen units by the character color reverse ON/OFF command (refer to 3.5 Character Color Reverse ON/OFF Command). |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |