| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
AN2836 bảng dữ liệu(PDF) 28 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
AN2836 bảng dữ liệu(HTML) 28 Page - STMicroelectronics |
|
28 / 57 page ![]() Designing an application with L6225, L6226, L6227 AN2836 28/57 Doc ID 15084 Rev 1 Figure 27. Output current detection threshold versus RCL value (L6226 only) The overcurrent detection threshold can also be adjusted through an external reference voltage, as shown in Figure 28. The external reference voltage source should be able to sink current (about 300 µA maximum). Moreover, if the supply voltage is provided to the L6226 before VEXT, and its EN pins are at a high logic level, the device starts working with minimum OCD threshold (actually the capacitor placed at the bottom of RCL allows a short startup time with a higher OCD threshold). VEXT can also be obtained through a PWM output of a µC, adding a series resistor to obtain a low-pass filter. The OCD threshold (ISOVER) follows the equation: ● ISOVER = ±10%, at -25 °C < Tj < 125 °C if 0.25 A < ISOVER < 2.25 A Figure 28. Adjusting the OCD threshold through an external reference voltage (L6226 only) 9208.3 1.2V Vext – () R CL ------------------------------------------------------- |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |