| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
AN2208 bảng dữ liệu(PDF) 25 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
AN2208 bảng dữ liệu(HTML) 25 Page - STMicroelectronics |
|
25 / 51 page ![]() AN2208 6 Electromagnetic compatibility (EMC) tests 25/51 6.4.3 Output port tests Figure 22 illustrates the output port test setup. The capacitive coupling clamp is the recommended method for coupling the generator source voltage into the output ports. All auxiliary devices are placed on the wood isolation board (0.1-meter thick). The test is performed while the HSD output port is switched On/Off at 1 Hz. Maximum test voltage must not exceed 4 kV. Figure 20. Switch diagram Figure 21. Test on input ports (IEC 61000-4-4) VPP Input OPT GND Ai11611 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |