| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
UM0934 bảng dữ liệu(PDF) 32 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
UM0934 bảng dữ liệu(HTML) 32 Page - STMicroelectronics |
|
32 / 113 page ![]() MAC layer UM0934 32/113 Doc ID 17389 Rev 2 When upper layers request a transmission through an M_Data.Request, according to the node type: ● Client and REPEATER: the node originates (IC+1) consecutive transmissions of the same MAC frame ● Server: whatever the value of the IC, the node performs only 1 transmission of the MAC frame. 4.8.2 Current credit (CC) The current credit (CC) is a 3-bit long field with an initial value equal to IC and automatically decremented by the MAC layer after each repetition. When receiving, the CC field is extracted and notified to the upper layers through the M_Data.Indication upon receipt of the first valid MAC frame within the repetition burst. Moreover, only in the case of REPEATER, does the node join the repetition by transmitting CC frames in the next time-slots. CC field is automatically decremented by the MAC layer after each repetition. 4.8.3 Delta credit (DC) Delta credit (DC) is 2 bits long and used by the system management application entity (SMAE) of the Client for credit management, while it has no meaning for a Server or a REPEATER. It represents the difference (IC-CC) of the last communication originated by the system identified by the DA address to the system identified by the SA address. When the MAC builds a long MAC frame, it receives the IC and DC credit values from the SMAE and they are usually specific to the destination address DA. The MAC fills the MAC frame header with the passed IC and DC values, while CC is equal to IC for the first transmitted frame. When a MAC frame is received, the MAC automatically decodes the IC, CC, DC values and notifies them to the upper layers (SMAE). 4.8.4 Repeater The REPEATER is basically a Server being able, in addition, to perform repetitions. A dedicated MIB object 000Bh (TIC selector and repeater state, 6.5.12) can be used to configure a Server as a REPEATER. 4.8.5 Example Figure 12 shows a repetition example. Upper layers of the Client station requests a broadcast (DA=FFFh) transmission of a MAC frame (made of a single subframe) with IC=CC=3. The Client performs the transmission of the original frame (IC=CC=3) followed by 3 repetitions, for a total amount of 4 transmissions. All the other nodes in the network (both Server and REPEATER) receive the transmissions and provide an M_Data.Indication to the local host upon receipt of the first valid MAC frame (i.e. with valid FCS), while the following transmissions are neglected (as they are detected as being repetitions). |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |