| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
UM0934 bảng dữ liệu(PDF) 22 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
UM0934 bảng dữ liệu(HTML) 22 Page - STMicroelectronics |
|
22 / 113 page ![]() MAC layer UM0934 22/113 Doc ID 17389 Rev 2 4 MAC layer 4.1 Overview The ST7570 embeds a MAC layer compliant with [2], with additional functions for the electrical delta-phase measurement. In order to meet the application’s functions and physical channel characteristics, many parameters involved at this layer can be programmed by the user. 4.2 Operating modes The following operating modes are supported, as defined by [2]: ● Client: is the master of the communication. ● Server: is the slave of the communication. Before being allowed to transmit, the ST7570 modem needs to achieve the “slot synchronization”. 4.2.1 Additional operating mode In addition to the operating modes (Client and Server), defined by [2], the MAC layer of the ST7570 also embeds a Monitor mode for specific tasks. Monitor mode When the node is running as “Monitor”: ● All the time-outs (Section 4.7) are disabled to allow the reception of frames, even if they are not valid (i.e. invalid FCS) or after a long silence period ● Every received frame causes an CMD_SynchroIndication (Section 5.3.1) to be sent to the host ● All the valid frames (i.e. valid FCS) are notified through an CMD_DataIndication (Section 5.3.11), whatever the source address and destination address ● Each repetition is notified through an CMD_DataIndication (Section 5.3.11) independently, if the modem is set as well as a REPEATER (Section 4.8.5). Special MIB objects (disable frame type check and disable CRC check, 0008h Section 6.5.9 , and auto synchro reject 0015h, Section 6.5.22) let the Monitor be configured as a sniffer capable of receiving and notifying all the frames: ● Disable frame type check and disable CRC check: these flags allow the long MAC frame type and frame CRC check to be disabled so that the wrong MAC frames are notified ● Auto synchro reject: this parameter makes the Monitor able to automatically reject the synchronism at the end of each received MAC frame. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |