| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
HT47C20 bảng dữ liệu(PDF) 14 Page - Holtek Semiconductor Inc |
|
|
|||||||||||||||||||||||||||||
HT47C20 bảng dữ liệu(HTML) 14 Page - Holtek Semiconductor Inc |
|
14 / 56 page ![]() HT47C20 14 January 18, 2000 Register Bit No. Label Function INTC0 (0BH) 0 EMI Control the master (global) interrupt (1= enabled; 0= disabled) 1 EEI Control the external interrupt (1= enabled; 0= disabled) 2 ETBI Control the time base interrupt (1= enabled; 0= disabled) 3 ERTI Control the real time clock interrupt (1= enabled; 0= disabled) 4 EIF External interrupt request flag (1= active; 0= inactive) 5 TBF Time base request flag (1= active; 0= inactive) 6 RTF Real time clock request flag (1= active; 0= inactive) 7 ¾ Unused bit, read as ²0² INTC1 (1EH) 0 ETI Control the timer/event counter interrupt (1= enabled; 0=disabled) 1 ¾ Unused bit, read as ²0² 2 ¾ Unused bit, read as ²0² 3 ¾ Unused bit, read as ²0² 4TF Internal timer/event counter request flag (1= active; 0= inactive) 5 ¾ Unused bit, read as ²0² 6 ¾ Unused bit, read as ²0² 7 ¾ Unused bit, read as ²0² INTC register Once an interrupt subroutine is serviced, all other interrupts will be blocked (by clearing the EMI bit). This scheme may prevent any further interrupt nesting. Other interrupt requests may happen during this interval, but only the interrupt request flag is recorded. If a certain interrupt needs servicing within the service routine, the EMI bit and the corresponding bit of INTC0 or INTC1 may be set allow interrupt nesting. If the stack is full, the interrupt request will not be acknowledged, even if the related in- terrupt is enabled, until the SP is decremented. If immediate service is desired, the stack must be prevented from becoming full. All these kinds of interrupt have a wake-up ca- pability. As an interrupt is serviced, a control transfer occurs by pushing the program counter onto the stack and then by branching to subrou- tines at specified location(s) in the program memory. Only the program counter is pushed onto the stack. If the contents of the register and status register (STATUS) is altered by the interrupt service program which corrupts the desired control sequence, the contents must be saved first. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |