ML7344J datasheet(124/151 Pages) ETC2

124 / 151 page

FEDL7344C/E/J-04

ML7344C/E/J

124/151

(8) ED scan

ED value will be automatically acquired by issuing RX_ON by [RF_STATU:B0 0x0B] register after setting

ED_CALC_EN ([ED_CTRL: B0 0x41(7)])=0b1. ED value is constanty updated when ED_RSLT_SET

([ED_CTRL:B0 0x41(3)] )=0b0.

START

ED value calculation

completion?

[ED_CTRL:B0 0x41(4)]

Yes

ED calculations enable setting

ED value constantly updated setting

[ED_CTRL: B0 0x41(7,3)]

Read ED value

[ED_RSLT:B0 0x3A]

Yes

Channel change ?

RF channel change

[CH_SET:B0 0x09]

TRX_OFF issue

[RF_STATUS:B0 0x0B]

RX_ON issue

[RF_STATUS:B0 0x0B]

These processes are not necessary if 250μswait

is added after RF channel change setting.

General purpose timer start

[GT_SET:B0 0x32]

Yes

To RF state transition wait flow

(*1)

(*1) general purpose timer setting example

If 250μs wait is programmed using general purpose timer 1,

The following registers can be used.

[GT_CLK_SET:B0 0x33]

0x01(128 division)

[GT_INTERVAL1:B0 0x34]

0x04(timer setting)

[GT_SET:B0 0x32]

0x03(2MHz clock, timer start)

ED value will be acquired by enabling ED

calculation after RX_ON issue,

ED value will be constantly updated

constantly

General Timer INT ?

[INT_SOURCE_GRP3:B0 0x0F]

INT[22]/INT[23]

General timer INT clear

[INT_SOURCE_GRP3:B0 0x0F]

INT[22]/INT[23]

ML7344J bảng dữ liệu(PDF) 124 Page - List of Unclassifed Manufacturers

ML7344J bảng dữ liệu(HTML) 124 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL