ML22Q573 datasheet(45/69 Pages) ETC2

45 / 69 page

FEDL22Q553-02

ML22Q553

12. CLOOP command

command

CH3

CH2

CH1

CH0

The CLOOP command releases repeat playback mode.

The command can be input for each channel.

The

CLOOP command allows specifying multiple channels at one time. Setting any bit(s) from CH0 to CH3 to “1”

releases repeat playback on the corresponding channel(s).

When repeat playback mode is released, the NCR

signal goes “H”.

It is possible to input the CLOOP command regardless of the status of the NCR signal during playback, but a

prescribed command interval needs taking.

Channel settings

Channel

CH0

Setting this bit to “1” releases repeat playback on channel 0.

CH1

Setting this bit to “1” releases repeat playback on channel 1.

CH2

Setting this bit to “1” releases repeat playback on channel 2.

CH3

Setting this bit to “1” releases repeat playback on channel 3.

Be sure to set the channel setting bits( CH0-CH3).

CSB

Status

Playing

SCK

NCR

BUSYB

SPM

1/2VDD

SPP

1/2VDD

Address being

controlled

Awaiting command

PLAY command

2nd byte

SLOOP command

Playing

Command being

processed

CLOOP command

Command being

processed

tcm

CBUSYB

(internal)

45/69

ML22Q573 bảng dữ liệu(PDF) 45 Page - List of Unclassifed Manufacturers

ML22Q573 bảng dữ liệu(HTML) 45 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69

bảng dữ liệu tải về

Link URL