TL-T

Safety Precautions

This product is not designed or rated for

ensuring safety of persons.

Do not use it for such purposes.

• Do not short the load. Explosion or burning may

result.

• Do not supply power to the Sensor with no load

connected, otherwise internal parts may be

damaged or burnt.

Applicable Models: AC 2-wire Models

Do not use this product under ambient conditions that exceed

the ratings.

● Design

Effect of Surrounding Metals

• Be sure to separate the Sensor from surrounding metal

objects as shown in the following illustration.

• The TL-T2 will not be influenced by metal when it is

embedded in metal.

Mutual Interference

When two or more Sensors are mounted face-to-face or side-

by-side, separate them as shown below. The table below

indicates the minimum distances A and B.

Mutual Interference

(Unit: mm)

Note: Figures in parentheses will apply if the Sensors in use are different from

each other in response frequency.

● Mounting

• At the time of rear mounting, be sure that the tightening

torque does not exceed 0.59 N·m.

• At the time of side mounting, be sure that the tightening

torque does not exceed 0.78 N·m.

(Unit: mm)

Dimensions

Unless otherwise specified, the tolerance class IT16 is used for dimensions in this data sheet.

WARNING

Precautions for Correct Use

12 mm

15 mm

15 mm 15 mm

25 mm

15 mm

15 mm

Distance

Model

A

B

TL-T2

40 (10)

12 (0)

TL-T5

120 (60)

80 (40)

AB

Mounting screw

0.59 N·m

Mounting screw

0.78 N·m

6

4

4

12

5

9

40

26

*1

Indicator *2

Sensing surface

Two, M3, depth 6

Two, 3.1-dia. holes

*1. DC-switching model: 4.0-dia.

vinyl-insulated round cable

with 3 conductors (Conductor

Insulator diameter: 1.2 mm),

Standard length: 2 m

AC-switching model: 4.0-dia.

vinyl-insulated round cable

with 2 conductors (Conductor

Insulator diameter: 1.3 mm),

Standard length: 2 m

*2. Detection indicator (red)

TL-T

@

In the interest of product improvement, specifications are subject to change without notice.

http://www.ia.omron.com/

5

(c)Copyright OMRON Corporation 2008 All Rights Reserved.