6/15

(Ver 1.0)

7. Packing

• The LEDs are packed in cardboard boxes after taping. The label shows part number, lot number, rank,

and quantity.

• In order to protect the LEDs from mechanical shock, they are packed with cardboard boxes

for transportation.

• The LEDs may be damaged if the boxes are dropped or receive a strong impact against them,

so cautions must be taken to prevent any possible damage.

• The boxes are not water-resistant and, therefore, must be kept away from water and moisture.

• When the LEDs are transported, it is recommended that the same packing method as Luxpia's is used.

• If noticeable damage on a box appears upon arrival at the user’s warehouse, the user should submit a

claim to Luxpia within one week after arrival of the products.