DOC7707 datasheet(168/307 Pages) ETC1

168 / 307 page

168

7707F–AVR–11/10

AT90USB82/162

Receiver will generate a parity value for the incoming data and compare it to the UPMn setting.

If a mismatch is detected, the UPEn Flag in UCSRnA will be set.

• Bit 3 – USBSn: Stop Bit Select

This bit selects the number of stop bits to be inserted by the Transmitter. The Receiver ignores

this setting.

• Bit 2:1 – UCSZn1:0: Character Size

The UCSZn1:0 bits combined with the UCSZn2 bit in UCSRnB sets the number of data bits

(Character SiZe) in a frame the Receiver and Transmitter use.

• Bit 0 – UCPOLn: Clock Polarity

This bit is used for synchronous mode only. Write this bit to zero when asynchronous mode is

used. The UCPOLn bit sets the relationship between data output change and data input sample,

and the synchronous clock (XCKn).

Table 17-5.

UPMn Bits Settings

UPMn1

UPMn0

Parity Mode

Disabled

Reserved

Enabled, Even Parity

Enabled, Odd Parity

Table 17-6.

USBS Bit Settings

USBSn

Stop Bit(s)

01-bit

12-bit

Table 17-7.

UCSZn Bits Settings

UCSZn2

UCSZn1

UCSZn0

Character Size

5-bit

6-bit

7-bit

8-bit

Reserved

9-bit

Table 17-8.

UCPOLn Bit Settings

UCPOLn

Transmitted Data Changed (Output of TxDn Pin)

Received Data Sampled (Input on RxDn Pin)

Rising XCKn Edge

Falling XCKn Edge

Rising XCKn Edge

DOC7707 bảng dữ liệu(PDF) 168 Page - List of Unclassifed Manufacturers

DOC7707 bảng dữ liệu(HTML) 168 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL