| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
ASTMB633 bảng dữ liệu(PDF) 18 Page - ITT Industries |
|
|
|||||||||||||||||||||||||||||
ASTMB633 bảng dữ liệu(HTML) 18 Page - ITT Industries |
|
18 / 41 page ![]() MIL-DTL-24308G w/AMENDMENT 2 18 TABLE XI. Qualification inspection – Continued. 1/ Connector class: 1. Classes D and G -Removable contact connectors. 2. Classes D and G -Nonremovable contact connectors. 3. Classes M and N -Removable contact connectors. 4. Classes M and N -Nonremovable contact connectors. 5. Classes H and K -Nonremovable contact connectors. 2/ Not applicable for periodic inspection. 3/ Not applicable for non-removable contacts. 4/ DC Connectors shall meet the test requirements specified for classes G and D nonremovable contact connectors. 5/ See 4.5.1.1 (nonmetallic materials of two connector assemblies). 6/ Not applicable for crimp, wrappost, and IDC contacts. 7/ Not applicable for hermetic connectors. 4.4 Conformance inspection. 4.4.1 Inspection of product for delivery. Inspection of product for delivery shall consist of group A inspection. 4.4.1.1 Inspection lot. An inspection lot shall consist of all connectors or removable crimp contacts, as applicable, covered by one specification sheet, produced under essentially the same conditions, and offered for inspection at one time. 4.4.1.2 Group A inspection. Group A inspection shall consist of the inspections specified in Table XII, in the order shown. 4.4.1.2.1 Sampling plan (group A). Table XII tests shall be performed on a production lot basis. Samples shall be selected as specified in table XIII. If one or more defects are found, the lot shall be screened for that particular defect and the defective parts removed. A new sample of parts shall be selected as specified in table XIII and all group A tests again performed. If one or more defects are found in the second sample, the lot shall be rejected and shall not be supplied to this specification. TABLE XII. Group A inspection. Inspection Requirement paragraph Test method paragraph Visual and mechanical inspection 3.1, 3.3, 3.4, 3.6, and 3.7 4.5.2 Contact engagement and separation forces (nonremovable contacts) 3.5.10 4.5.12 Insulation resistance at ambient temperature 3.5.8 4.5.10 Dielectric withstanding voltage (sea level) 3.5.6 4.5.8 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |