33461 datasheet(9/60 Pages) MACOM

9 / 60 page

SOLISTRAND, Budget and DIAMOND GRIP

Uninsulated Terminals and Splices

Catalog 65505

Revised 9-00

For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.

Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.

Specifications subject to change. Consult AMP for latest specifications.

The Budget Terminal

Budget Terminals and splices are pri-

marily the same as SOLISTRAND prod-

ucts except for the absence of the brazed

seam in the wire barrel. This terminal is

ideal for applications where extreme

vibration and tension on the wire are not

present. These terminals and splices ful-

fill the need for an economical and elec-

trically superior termination through the

use of high grade materials, long plating

experience and a proven crimp.

One of the most desirable features of this

terminal and splice is the “F” Crimp.

This proven crimp configuration rolls the

open seam barrel into the conductor pre-

senting a large surface to the inside of

the terminal barrel assuring optimum

electrical performance.

The Budget line includes butt splices,

ring, rectangular, flanged spade, hooked,

and spring spade tongue terminals in

sizes from 26 AWG [0.1 mm2] through

10 AWG [6.64 mm2].

Temperature Rating: 170°C Max.

AMP Budget Terminals and Splices

(Use Budget Tooling)

Wire Size

Listed

File No. E13288

22–16

Stranded

16–14

Stranded

12–10

Stranded

Note: 22-16 terminals and splices are stamped

22-18 in accordance with MIL-T-7928.

Commercial wire range is 22-16.

BASIC TERMINAL MATERIAL. The

basic terminal is constructed of fine

grade high conductivity copper per

ASTM B-152 and tin-plated per MIL-

T-10727. Basic material for Spring

Spade Tongue Terminals is phos-

phor bronze per ASTM B-103 and

tin-plated per MIL-T-10727. AMP’s

special plating process creates

durable corrosion resistance to salt

spray and most chemical fumes.

BELL MOUTH. Bell shape of barrel

entrance makes insertion of wires

easier.

SERRATIONS. Inner surface

serrated for optimum tensile

strength and maximum electrical

contact area after crimping.

33461 bảng dữ liệu(PDF) 9 Page - Tyco Electronics

33461 bảng dữ liệu(HTML) 9 Page - Tyco Electronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

bảng dữ liệu tải về

Link URL