STF10N62K3, STFI10N62K3, STI10N62K3, STP10N62K3

Electrical characteristics

Doc ID 15640 Rev 4

5/17

The built-in back-to-back Zener diodes have specifically been designed to enhance not only

the device’s ESD capability, but also to make them safely absorb possible voltage transients

that may occasionally be applied from gate to source. In this respect the Zener voltage is

appropriate to achieve an efficient and cost-effective intervention to protect the device’s

integrity. These integrated Zener diodes thus avoid the usage of external components.

Table 6.

Switching times

Symbol

Parameter

Test conditions

Min.

Typ.

Max. Unit

Turn-on delay time

Rise time

Turn-off-delay time

Fall time

(see

Figure 17)

-

14.5

15

41

31

-

ns

ns

ns

ns

Table 7.

Source drain diode

Symbol

Parameter

Test conditions

Min.

Typ.

Max. Unit

(1)

1.

Pulse width limited by safe operating area

Source-drain current

Source-drain current (pulsed)

-

8.4

33.6

A

A

(2)

2.

Pulsed: Pulse duration = 300 µs, duty cycle 1.5%

Forward on voltage

-

1.5

V

Reverse recovery time

Reverse recovery charge

Reverse recovery current

-

320

2

13

ns

µC

A

Reverse recovery time

Reverse recovery charge

Reverse recovery current

(see

Figure 22)

-

410

2.9

14

ns

µC

A

Table 8.

Gate-source Zener diode

Symbol

Parameter

Test conditions

Min.

Typ.

Max. Unit

voltage (ID = 0)

Igs= ± 1 mA

30

-

V