F28M36P63C2ZWTQ datasheet(5/202 Pages) TI

5 / 202 page

F28M36P63B2, F28M36P63C2

F28M36P53B2, F28M36P53C2, F28M36P33B2, F28M36P33C2

www.ti.com

SPRS825 – OCTOBER 2012

Device Overview

The Concerto™ microcontroller (MCU) comprises three subsystems: the Master Subsystem, the Control

Subsystem, and the Analog Subsystem. While the Master and Control Subsystem each have dedicated

local memories and peripherals, they can also share data and events through shared memories and

peripherals. The Analog Subsystem has two ADC converters and six Analog Comparators. Both the

Master and Control Subsystems access the Analog Subsystem through the Analog Common Interface

Bus (ACIB). The NMI Blocks force communication of critical events to the Master and Control Subsystem

processors and their Watchdog Timers. The Reset Block responds to Watchdog Timer NMI Reset,

External Reset, and other events to initialize subsystem processors and the rest of the chip to a known

state. The Clocking Blocks support multiple low-power modes where clocks to the processors and

peripherals can be slowed down or stopped in order to manage power consumption.

NOTE

Throughout this document, the Master Subsystem is denoted by the color "blue"; the Control

Subsystem is denoted by the color "green"; and the Analog Subsystem is denoted by the

color "orange".

Device Overview

Submit Documentation Feedback

F28M36P63C2ZWTQ bảng dữ liệu(PDF) 5 Page - Texas Instruments