41594B datasheet(139/372 Pages) MICROCHIP

139 / 372 page

 2011-2012 Microchip Technology Inc.

Preliminary

DS41594B-page 139

PIC12LF1840T48A

17.0 DIGITAL-TO-ANALOG

CONVERTER (DAC) MODULE

The Digital-to-Analog Converter supplies a variable

voltage reference, ratiometric with the input source,

with 32 selectable output levels.

The input of the DAC can be connected to:

•External VREF pins

•VDD supply voltage

• FVR (Fixed Voltage Reference)

The output of the DAC can be configured to supply a

reference voltage to the following:

• Comparator positive input

• ADC input channel

•DACOUT pin

• Capacitive Sensing (CPS) module

The Digital-to-Analog Converter (DAC) can be enabled

by setting the DACEN bit of the DACCON0 register.

17.1

Output Voltage Selection

The DAC has 32 voltage level ranges. The 32 levels

are set with the DACR<4:0> bits of the DACCON1

The DAC output voltage is determined by the following

equations:

EQUATION 17-1:

DAC OUTPUT VOLTAGE

17.2

Ratiometric Output Level

The DAC output value is derived using a resistor ladder

with each end of the ladder tied to a positive and

negative voltage reference input source. If the voltage

of either input source fluctuates, a similar fluctuation will

result in the DAC output value.

The value of the individual resistors within the ladder

can

found

Section 31.0

“Electrical

Specifications”.

17.3

DAC Voltage Reference Output

The DAC can be output to the DACOUT pin by setting

the DACOE bit of the DACCON0 register to ‘1’.

Selecting the DAC reference voltage for output on the

DACOUT pin automatically overrides the digital output

buffer and digital input threshold detector functions of

that pin. Reading the DACOUT pin when it has been

configured for DAC reference voltage output will

always return a ‘0’.

Due to the limited current drive capability, a buffer must

be used on the DAC voltage reference output for

external connections to DACOUT. Figure 17-2 shows

an example buffering technique.

IF DACEN = 1

IF DACEN = 0 & DACLPS = 1 & DACR[4:0] = 11111

VOUT

VSOURCE +

IF DACEN = 0 & DACLPS = 0 & DACR[4:0] = 00000

VOUT

VSOURCE –

VSOURCE+ = VDD, VREF, or FVR BUFFER 2

VSOURCE- = VSS

VOUT

VSOURCE+VSOURCE-

–

 DACR 4:0



-----------------------------







VSOURCE-

41594B bảng dữ liệu(PDF) 139 Page - Microchip Technology

41594B bảng dữ liệu(HTML) 139 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL