| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
WM9093ECS/R bảng dữ liệu(PDF) 46 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM9093ECS/R bảng dữ liệu(HTML) 46 Page - Wolfson Microelectronics plc |
|
46 / 84 page ![]() WM9093 Production Data w PD, March 2012, Rev 4.2 46 REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R21 (15h) IN3 Line Control 0 IN3_CLAMP 1 IN3+ and IN3- input pad VMID clamp 0 = Clamp de-activated 1 = Clamp activated R22 (16h) IN1 Line Control 0 IN1_CLAMP 1 IN1+ and IN1- input pad VMID clamp 0 = Clamp de-activated 1 = Clamp activated R23 (17h) IN2 Line Control 0 IN2_CLAMP 1 IN2+ and IN2- input pad VMID clamp 0 = Clamp de-activated 1 = Clamp activated R57 (39h) AntiPOP2 3 VMID_BUF_ENA 1 VMID Buffer Enable 0 = Disabled 1 = Enabled Table 23 Input VMID Clamps HEADPHONE ENABLE/DISABLE The ground-referenced headphone outputs implement Wolfson’s SilentSwitch™ technology to minimise pop noise associated with enabling and disabling. The output pins HPL and HPR are shorted to GND by default while the individual driver stages are enabled. As a final step the short circuit is then removed on each of these paths by setting the applicable fields HPOUT1L_RMV_SHORT and HPOUT1R_RMV_SHORT. The ground-referenced Headphone output drivers are designed to suppress pops and clicks when enabled or disabled. However, it is necessary to control the drivers in accordance with a defined sequence in start-up and shut-down to achieve the pop suppression. It is also necessary to schedule the DC Servo offset correction at the appropriate point in the sequence (see “DC Servo”). Table 24 and Table 25 describe the recommended sequences for enabling and disabling these output drivers. SEQUENCE HEADPHONE ENABLE Step 1 HPOUT1L_ENA = 1 HPOUT1R_ENA = 1 Step 2 HPOUT1L_DLY = 1 HPOUT1R_DLY = 1 Step 3 DC offset correction Step 4 HPOUT1L_OUTP = 1 HPOUT1L_RMV_SHORT = 1 HPOUT1R_OUTP = 1 HPOUT1R_RMV_SHORT = 1 Table 24 Headphone Output Enable Sequence SEQUENCE HEADPHONE DISABLE Step 1 HPOUT1L_RMV_SHORT = 0 HPOUT1L_DLY = 0 HPOUT1L_OUTP = 0 HPOUT1R_RMV_SHORT = 0 HPOUT1R_DLY = 0 HPOUT1R_OUTP = 0 Step 2 HPOUT1L_ENA = 0 HPOUT1R_ENA = 0 Table 25 Headphone Output Disable Sequence |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |