| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
LRI1K bảng dữ liệu(PDF) 20 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
LRI1K bảng dữ liệu(HTML) 20 Page - STMicroelectronics |
|
20 / 86 page ![]() Communications signal from LRI1K to VCD LRI1K 20/86 Doc ID 17170 Rev 3 4 Communications signal from LRI1K to VCD The LRI1K has several modes defined for some parameters, owing to which it can operate in different noise environments and meet different application requirements. 4.1 Load modulation The LRI1K is capable of communication with the VCD via an inductive coupling area whereby the carrier is loaded to generate a subcarrier with frequency fS. The subcarrier is generated by switching a load in the LRI1K. The load-modulated amplitude received on the VCD antenna shall be at least 10 mV when measured as described in the test methods defined in International Standard ISO 10373-7. 4.2 Subcarrier The LRI1K supports the one-subcarrier and two-subcarrier response formats. These formats are selected by the VCD using the first bit in the protocol header. When one subcarrier is used, the frequency fS1 of the subcarrier load modulation is 423.75 kHz (fC/32). When two subcarriers are used, frequency fS1 is 423.75 kHz (fC/32), and frequency fS2 is 484.28 kHz (fC/28). When using the two-subcarrier mode, the LRI1K generates a continuous phase relationship between fS1 and fS2. 4.3 Data rates The LRI1K can respond using the low or the high data rate format. The selection of the data rate is made by the VCD using the second bit in the protocol header. It also supports the x2 mode available on all the Fast commands. Table 4 shows the different data rates produced by the LRI1K using the different response format combinations. Table 4. Response data rate Data rate One subcarrier Two subcarriers Low Standard commands 6.62 Kbits/s (fc/2048) 6.67 Kbits/s (fc/2032) Fast commands 13.24 Kbits/s (fc/1024) not applicable High Standard commands 26.48 Kbits/s (fc/512) 26.69 Kbits/s (fc/508) Fast commands 52.97 Kbits/s (fc/256) not applicable |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |