| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
LRI1K bảng dữ liệu(PDF) 12 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
LRI1K bảng dữ liệu(HTML) 12 Page - STMicroelectronics |
|
12 / 86 page ![]() Description LRI1K 12/86 Doc ID 17170 Rev 3 1.2 Commands The LRI1K supports the following commands: ● Inventory, used to perform the anticollision sequence. ● Stay Quiet, used to put the LRI1K in quiet mode, where it does not respond to any inventory command. ● Select, used to select the LRI1K. After this command, the LRI1K processes all Read/Write commands with Select_flag set. ● Reset To Ready, used to put the LRI1K in the ready state. ● Read Block, used to output the 32 bits of the selected block and its locking status. ● Write Block, used to write the 32-bit value in the selected block, provided that it is not locked. ● Lock Block, used to lock the selected block. After this command, the block cannot be modified. ● Read Multiple Blocks, used to read the selected blocks and send back their value. ● Write AFI, used to write the 8-bit value in the AFI register. ● Lock AFI, used to lock the AFI register. ● Write DSFID, used to write the 8-bit value in the DSFID register. ● Lock DSFID, used to lock the DSFID register. ● Get System Info, used to provide the system information value ● Get Multiple Block Security Status, used to send the security status of the selected block. ● Initiate, used to trigger the tag response to the Inventory Initiated sequence. ● Inventory Initiated, used to perform the anticollision sequence triggered by the Initiate command. ● Kill, used to definitively deactivate the tag. ● Write Kill, used to write the 32-bit Kill code value ● Lock Kill, used to lock the Kill Code register. ● Fast Initiate, used to trigger the tag response to the Inventory Initiated sequence. ● Fast Inventory Initiated, used to perform the anticollision sequence triggered by the Initiate command. ● Fast Read Block, used to output the 32 bits of the selected block and its locking status. ● Fast Read Multiple Blocks, used to read the selected blocks and send back their value. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |