MMA8653FC datasheet(25/56 Pages) FREESCALE

25 / 56 page

MMA8653FC

Sensors

Freescale Semiconductor, Inc.

6.4.2

0x0C: INT_SOURCE, System Interrupt Status Register

In the interrupt source register the status of the various embedded features can be determined. The bits that are set (logic ‘1’)

indicate which function has asserted an interrupt and conversely the bits that are cleared (logic ‘0’) indicate which function has

not asserted or has de-asserted an interrupt. The bits are set by a low to high transition and are cleared by reading the

appropriate interrupt source register.

Figure 23. 0x0C: INT_SOURCE, System Interrupt Status Register (Read Only)

Bit 7

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

SRC_ASLP

SRC_LNDPRT

SRC_FF_MT

SRC_DRDY

Table 15. INT_SOURCE register

Field

Description

SRC_ASLP

Auto-SLEEP/WAKE interrupt status bit. Default value: 0.

• Logic ‘1’ indicates that an interrupt event that can cause a WAKE to SLEEP or SLEEP to WAKE system mode transition

has occurred.

• Logic ‘0’ indicates that no WAKE to SLEEP or SLEEP to WAKE system mode transition interrupt event has occurred.

WAKE to SLEEP transition occurs when no interrupt occurs for a time period that exceeds the user specified limit

(ASLP_COUNT). This causes the system to transition to a user specified low ODR setting.

SLEEP to WAKE transition occurs when the user specified interrupt event has woken the system; thus causing the

system to transition to a user specified high ODR setting.

• Reading the SYSMOD register clears the SRC_ASLP bit.

SRC_LNDPRT

Portrait/Landscape Orientation interrupt status bit. Default value: 0.

Logic ‘1’ indicates that an interrupt was generated due to a change in the device orientation status. Logic ‘0’ indicates

that no change in orientation status was detected.

• This bit is asserted whenever “NEWLP” bit in the PL_STATUS is asserted and the interrupt has been enabled.

• This bit is cleared by reading the PL_STATUS register.

SRC_FF_MT

Freefall/Motion interrupt status bit. Default value: 0.

Logic ‘1’ indicates that the Freefall/Motion function interrupt is active. Logic ‘0’ indicates that no Freefall or Motion event

was detected.

• This bit is asserted whenever “EA” bit in the FF_MT_SRC register is asserted and the FF_MT interrupt has been

enabled.

• This bit is cleared by reading the FF_MT_SRC register.

SRC_DRDY

Data Ready Interrupt bit status. Default value: 0.

Logic ‘1’ indicates that the X, Y, Z data ready interrupt is active indicating the presence of new data and/or data overrun.

Otherwise if it is a logic ‘0’ the X, Y, Z interrupt is not active.

• This bit is asserted when the ZYXOW and/or ZYXDR is set and the interrupt has been enabled.

• This bit is cleared by reading the X, Y, and Z data. It is not cleared by simply reading the Status Register (0x00).

MMA8653FC bảng dữ liệu(PDF) 25 Page - Freescale Semiconductor, Inc

MMA8653FC bảng dữ liệu(HTML) 25 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

bảng dữ liệu tải về

Link URL