| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
AD9737ABBCZ bảng dữ liệu(PDF) 56 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
AD9737ABBCZ bảng dữ liệu(HTML) 56 Page - Analog Devices |
|
56 / 64 page ![]() AD9737A/AD9739A Data Sheet Rev. | Page 56 of 64 CLOCK INPUT CONSIDERATIONS D D Q VCC VEE VT Q VREF 50Ω 50Ω 50Ω 50Ω 50Ω DACCLK_P DACCLK_N 100Ω 10nF 10nF ADCLK914 AD9737A/AD9739A 10nF 10nF 50Ω Figure 173. ADCLK914 Interface to the AD9737A/AD9739A CLK Input VCO PLL ADF4350 FREF 1.8V p-p VVCO 1nF 1nF 3.9nH RFOUTA– RFOUTA+ RFOUTA– RFOUTA+ 100Ω DACCLK_P DACCLK_N DIV-BY-2N N = 0 – 4 AD9737A/AD9739A Figure 174. ADF4350 Interface to the AD9737A/AD9739A CLK Input The quality of the clock source and its drive strength are important considerations in maintaining the specified ac performance. The phase noise and spur characteristics of the clock source should be selected to meet the target application requirements. Phase noise and spurs at a given frequency offset on the clock source are directly translated to the output signal. It can be shown that the phase noise characteristics of a reconstructed output sine wave are related to the clock source by 20 × log10(fOUT/fCLK) when the DAC clock path contribution, along with thermal and quantization effects, are negligible. The AD9737A/AD9739A clock receiver provides optimum jitter performance when driven by a fast slew rate originating from the LVPECL or CML output drivers. For a low jitter sinusoidal clock source, the ADCLK914 can be used to square-up the signal and provide a CML input signal for the AD9737A/AD9739A clock receiver. Note that all specifications and characterization presented in the data sheet are with the ADCLK914 driven by a high quality RF signal generator with the clock receiver biased at an 800 mV level. Figure 174 shows a clock source based on the ADF4350 low phase noise/jitter PLL. The ADF4350 can provide output frequencies from 140 MHz up to 4.4 GHz with jitter as low as 0.5 ps rms. Each single-ended output can provide a squared-up output level that can be varied from −4 dBm to +5 dBm, allowing for >2 V p-p output differential swings. The ADF4350 also includes an additional CML buffer that can be used to drive another AD9737A/AD9739A device. ESD DACCLK_P DACCLK_N VDDC VSSC CLKx_OFFSET DIR_x = 0 CLKx_OFFSET DIR_x = 0 4-BIT PMOS IOUT ARRAY 4-BIT NMOS IOUT ARRAY Figure 175. Clock Input and Common-Mode Control C |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |