công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

CM6901XIP bảng dữ liệu(PDF) 11 Page - Champion Microelectronic Corp.

tên linh kiện CM6901XIP
Giải thích chi tiết về linh kiện  SLS (SRC/LLCSR) Controller with 1 FM2 PWMs
PDF  15 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
nhà sản xuất  CHAMP [Champion Microelectronic Corp.]
Trang chủ  http://www.champion-micro.com
Logo CHAMP - Champion Microelectronic Corp.

CM6901XIP bảng dữ liệu(HTML) 11 Page - Champion Microelectronic Corp.

Back Button CM6901XIP Datasheet HTML 7Page - Champion Microelectronic Corp. CM6901XIP Datasheet HTML 8Page - Champion Microelectronic Corp. CM6901XIP Datasheet HTML 9Page - Champion Microelectronic Corp. CM6901XIP Datasheet HTML 10Page - Champion Microelectronic Corp. CM6901XIP Datasheet HTML 11Page - Champion Microelectronic Corp. CM6901XIP Datasheet HTML 12Page - Champion Microelectronic Corp. CM6901XIP Datasheet HTML 13Page - Champion Microelectronic Corp. CM6901XIP Datasheet HTML 14Page - Champion Microelectronic Corp. CM6901XIP Datasheet HTML 15Page - Champion Microelectronic Corp.  
Zoom Inzoom in Zoom Outzoom out
 11 / 15 page
background image
CM6901
SLS (SRC/LLC+SR) Controller with 1 FM+2 PWMs
2012/05/09 Rev2.0
Champion Microelectronic Corporation
Page 11
Soft Start and Enable
Soft start of the FM and PWM is controlled by the selection of the external capacitor at CSS pin. A current source
of 7.5uA supplies the charging current for the capacitor. Soft start of the FM and PWM begins at 1.25V. The soft
start pin CSS also serves as an enable function. The output drivers are enabled when CSS pin reached 1V.
Auto-retry Mode
During normal operation, CSS pin will be charged to 5.5V + VBE. When VFB exceeds 2.93V due to ILIM exceeds
1V due to over current condition, output drivers are immediate set to low , and CSS begins to discharge with 0.75uA
current source. When CSS pin is below 0.9V, 7.5uA current source start charging the CSS pin. When CSS pin
reaches 1V, the output drivers are re-enable and the controller goes into soft start mode. If over current condition
still exists then, the outputs are immediately disabled, but CSS continues to charge toward 5V. When CSS
reaches 5V, 7.5uA charging current is disabled and 0.75uA current source begins to discharge the CSS, and the
cycle repeat until over current condition is removed.
OCP Setting
5.5 V+VBE
Css
ILimit
1V
0.9V
5V



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15


bảng dữ liệu tải về

Go To PDF Page


Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ] 

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com