| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
LPC1786 bảng dữ liệu(PDF) 96 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
LPC1786 bảng dữ liệu(HTML) 96 Page - NXP Semiconductors |
|
96 / 117 page ![]() LPC178X_7X All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Objective data sheet Rev. 2 — 27 May 2011 96 of 117 NXP Semiconductors LPC178x/7x 32-bit ARM Cortex-M3 microcontroller [1] Conditions: VSSA =0V, VDDA =3.3 V. [2] The ADC is monotonic, there are no missing codes. [3] The differential linearity error (ED) is the difference between the actual step width and the ideal step width. See Figure 31. [4] The integral non-linearity (EL(adj)) is the peak difference between the center of the steps of the actual and the ideal transfer curve after appropriate adjustment of gain and offset errors. See Figure 31. [5] The offset error (EO) is the absolute difference between the straight line which fits the actual curve and the straight line which fits the ideal curve. See Figure 31. [6] The gain error (EG) is the relative difference in percent between the straight line fitting the actual transfer curve after removing offset error, and the straight line which fits the ideal transfer curve. See Figure 31. [7] The absolute error (ET) is the maximum difference between the center of the steps of the actual transfer curve of the non-calibrated ADC and the ideal transfer curve. See Figure 31. [8] See Figure 32. [9] 8-bit resolution is achieved by ignoring the lower four bits of the ADC conversion result. fc(ADC) ADC conversion frequency --400 kHz 8-bit resolution[9]; 1.16 MSamples/sec ED differential linearity error [1][2][3] - 1- LSB EL(adj) integral non-linearity [1][4] - 1- LSB EO offset error [1][5] - 1- LSB EG gain error [1][6] - 1- LSB ET absolute error [1][7] --<tbd> LSB fclk(ADC) ADC clock frequency - - 36 MHz fc(ADC) ADC conversion frequency --1.16 MHz Table 29. ADC characteristics …continued VDDA = 2.7 V to 3.6 V; Tamb =25 C. Symbol Parameter Conditions Min Typ Max Unit |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |