| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
DAC8563SDGST bảng dữ liệu(PDF) 37 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
DAC8563SDGST bảng dữ liệu(HTML) 37 Page - Texas Instruments |
|
37 / 56 page ![]() V A OUT V B OUT GND LDAC CLR 1 2 3 4 5 6 7 8 9 10 SYNC SYNC SCLK SCLK D IN D IN AV DD AV DD V /V REFIN REFOUT V / V REFIN REFOUT 1 2 3 4 5 6 7 8 9 10 V A OUT V B OUT GND LDAC CLR AV DD AV DD 1 F m 1 F m 150 nF 150 nF DGS DSC ( ) REF _ MAX REF _ MIN 6 REF RANGE V V Drift Error 10 ppm / C V T - æ ö = ´ ° ç ÷ ç ÷ ´ è ø DAC8562, DAC8563 DAC8162, DAC8163 DAC7562, DAC7563 www.ti.com SLAS719C – AUGUST 2010 – REVISED JUNE 2011 APPLICATION INFORMATION INTERNAL REFERENCE The internal reference of the DAC756x, DAC816x, and DAC856x does not require an external load capacitor for stability because it is stable without any capacitive load. However, for improved noise performance, an external load capacitor of 150 nF or larger connected to the VREFIN/VREFOUT output is recommended. Figure 93 shows the typical connections required for operation of the DAC756x, DAC816x, and DAC856x internal reference. A supply bypass capacitor at the AVDD input is also recommended. Figure 93. Typical Connections for Operating the DAC756x/DAC816x/DAC856x Internal Reference Supply Voltage The internal reference features an extremely low dropout voltage. It can be operated with a supply of only 5 mV above the reference output voltage in an unloaded condition. For loaded conditions, refer to the Load Regulation section. The stability of the internal reference with variations in supply voltage (line regulation, DC PSRR) is also exceptional. Within the specified supply voltage range of 2.7 V to 5.5 V, the variation at VREFIN/VREFOUT is typically 50 µV/V; see Figure 7. Temperature Drift The internal reference is designed to exhibit minimal drift error, defined as the change in reference output voltage over varying temperature. The drift is calculated using the box method described by Equation 3: (3) where: VREF_MAX = maximum reference voltage observed within temperature range TRANGE. VREF_MIN = minimum reference voltage observed within temperature range TRANGE. VREF = 2.5 V, target value for reference output voltage. TRANGE = the characterized range from –40°C to 125°C (165°C range) The internal reference features an exceptional typical drift coefficient of 4 ppm/ °C from –40°C to 125°C. Characterizing a large number of units, a maximum drift coefficient of 10 ppm/ °C is observed. Temperature drift results are summarized in Figure 3. Noise Performance Typical 0.1-Hz to 10-Hz voltage noise and noise spectral density performance are listed in the Electrical Characteristics. Additional filtering can be used to improve output noise levels, although care should be taken to ensure the output impedance does not degrade the AC performance. The output noise spectrum at the VREFIN/VREFOUT pin, both unloaded and with an external 4.7-µF load capacitor, is shown in Figure 6. Internal reference noise impacts the DAC output noise when the internal reference is used. Copyright © 2010–2011, Texas Instruments Incorporated Submit Documentation Feedback 37 Product Folder Link(s): DAC8562 DAC8563 DAC8162 DAC8163 DAC7562 DAC7563 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |