PIC12F752 datasheet(117/204 Pages) MICROCHIP

117 / 204 page

 2011 Microchip Technology Inc.

Preliminary

DS41576A-page 117

PIC12F752/HV752

15.0

COMPARATOR MODULE

Comparators are used to interface analog circuits to a

digital circuit by comparing two analog voltages and

providing a digital indication of their relative magnitudes.

Comparators are very useful mixed signal building

blocks because they provide analog functionality

independent

program

execution.

The

analog

comparator module includes the following features:

• Independent comparator control

• Programmable input selection

• Comparator output is available internally/externally

• Programmable output polarity

• Interrupt-on-change

• Wake-up from Sleep

• Programmable Speed/Power optimization

•PWM shutdown

• Programmable and fixed voltage reference

15.1

Comparator Overview

A single comparator is shown in Figure 15-1 along with

the relationship between the analog input levels and

the digital output. When the analog voltage at VIN+ is

less than the analog voltage at VIN-, the output of the

comparator is a digital low level. When the analog

voltage at VIN+ is greater than the analog voltage at

VIN-, the output of the comparator is a digital high level.

FIGURE 15-1:

SINGLE COMPARATOR

–

VIN+

VIN-

Output

VIN+

VIN-

Note:

The black areas of the output of the

comparator represents the uncertainty

due to input offsets and response time.

PIC12F752 bảng dữ liệu(PDF) 117 Page - Microchip Technology

PIC12F752 bảng dữ liệu(HTML) 117 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL