LPC2362 datasheet(8/57 Pages) NXP

8 / 57 page

LPC2361_62_4

Product data sheet

Rev. 04 — 4 March 2010

8 of 57

NXP Semiconductors

LPC2361/62

Single-chip 16-bit/32-bit MCU

P0[28]/SCL0

24[4]

I/O

P0[28] — General purpose digital input/output pin. Output is open-drain.

I/O

SCL0 — I2C0 clock input/output. Open-drain output (for I2C-bus compliance).

P0[29]/USB_D+

29[5]

I/O

P0[29] — General purpose digital input/output pin.

I/O

USB_D+ — USB bidirectional D+ line.

P0[30]/USB_D

−

30[5]

I/O

P0[30] — General purpose digital input/output pin.

I/O

USB_D

− — USB bidirectional D− line.

P1[0] to P1[31]

I/O

Port 1: Port 1 is a 32-bit I/O port with individual direction controls for each bit. The

operation of port 1 pins depends upon the pin function selected via the pin connect

block. Pins 2, 3, 5, 6, 7, 11, 12, and 13 of this port are not available.

P1[0]/ENET_TXD0

95[1]

I/O

P1[0] — General purpose digital input/output pin.

ENET_TXD0 — Ethernet transmit data 0 (LPC2362 only).

P1[1]/ENET_TXD1

94[1]

I/O

P1[1] — General purpose digital input/output pin.

ENET_TXD1 — Ethernet transmit data 1 (LPC2362 only).

P1[4]/ENET_TX_EN

93[1]

I/O

P1[4] — General purpose digital input/output pin.

ENET_TX_EN — Ethernet transmit data enable (LPC2362 only).

P1[8]/ENET_CRS

92[1]

I/O

P1[8] — General purpose digital input/output pin.

ENET_CRS — Ethernet carrier sense (LPC2362 only).

P1[9]/ENET_RXD0

91[1]

I/O

P1[9] — General purpose digital input/output pin.

ENET_RXD0 — Ethernet receive data (LPC2362 only).

P1[10]/ENET_RXD1

90[1]

I/O

P1[10] — General purpose digital input/output pin.

ENET_RXD1 — Ethernet receive data (LPC2362 only).

P1[14]/

ENET_RX_ER

89[1]

I/O

P1[14] — General purpose digital input/output pin.

ENET_RX_ER — Ethernet receive error (LPC2362 only).

P1[15]/

ENET_REF_CLK

88[1]

I/O

P1[15] — General purpose digital input/output pin.

ENET_REF_CLK — Ethernet reference clock (LPC2362 only).

P1[16]/ENET_MDC

87[1]

I/O

P1[16] — General purpose digital input/output pin.

ENET_MDC — Ethernet MIIM clock (LPC2362 only).

P1[17]/ENET_MDIO

86[1]

I/O

P1[17] — General purpose digital input/output pin.

I/O

ENET_MDIO — Ethernet MIIM data input and output (LPC2362 only).

P1[18]/

USB_UP_LED/

PWM1[1]/CAP1[0]

32[1]

I/O

P1[18] — General purpose digital input/output pin.

USB_UP_LED — USB GoodLink LED indicator. It is LOW when device is

configured (non-control endpoints enabled). It is HIGH when the device is not

configured or during global suspend.

PWM1[1] — Pulse Width Modulator 1, channel 1 output.

CAP1[0] — Capture input for Timer 1, channel 0.

P1[19]/

USB_TX_E1/

USB_PPWR1/

CAP1[1]

33[1]

I/O

P1[19] — General purpose digital input/output pin.

USB_TX_E1 — Transmit Enable signal for USB port 1 (OTG transceiver).

USB_PPWR1 — Port Power enable signal for USB port 1.

CAP1[1] — Capture input for Timer 1, channel 1.

Table 3.

Pin description …continued

Symbol

Type

Description

LPC2362 bảng dữ liệu(PDF) 8 Page - NXP Semiconductors

LPC2362 bảng dữ liệu(HTML) 8 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57

bảng dữ liệu tải về

Link URL