| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MB91F613 bảng dữ liệu(PDF) 95 Page - fujitsu semiconductor |
|
|
|||||||||||||||||||||||||||||
MB91F613 bảng dữ liệu(HTML) 95 Page - fujitsu semiconductor |
|
95 / 104 page ![]() MB91610 Series DS07-16907-2E 95 *2 : Use differential-Receiver to receive USB differential data signal. Differential-Receiver has 200 [mV] of differential input sensitivity when the differential data input is within 0.8 [V] to 2.5 [V] to the local ground reference level. Above voltage range is the common mode input voltage range. *3 : The output drive capability of the driver is below 0.3 [V] at Low-State (VOL) (to 3.6 [V] and 1.5 k Ω load), and 2.8 [V] or above (to the VSS and 1.5 k Ω load) at High-State (VOH). *4 : The cross voltage of the external differential output signal (D + /D − ) of USB I/O buffer is within 1.3 [V] to 2.0 [V]. *5 : Regarding tFR ,tFF, tRFM They indicate rise time (Trise) and fall time (Tfall) of the differential data signal. They are defined by the time between 10 % to 90% of the output signal voltage. For full-speed buffer, tFR/tFF ratio is regulated as within ±10% to minimize RFI emission. (Continued) 1.0 [V] 0.2 [V] 0.8 [V] 2.5 [V] Common mode input voltage [V] D+ D- Max 2.0 [V] Min 1.3 [V] VCRS standard range 90% 90% 10% 10% VCRS UDP UDM tFR tFF Rise time Fall time |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |