công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

P89LPC954 bảng dữ liệu(PDF) 35 Page - NXP Semiconductors

tên linh kiện P89LPC954
Giải thích chi tiết về linh kiện  8-bit microcontroller with accelerated two-clock 80C51 core 8 kB/16 kB 3 V byte-erasable flash with 10-bit ADC
PDF  69 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
nhà sản xuất  NXP [NXP Semiconductors]
Trang chủ  http://www.nxp.com
Logo NXP - NXP Semiconductors

P89LPC954 bảng dữ liệu(HTML) 35 Page - NXP Semiconductors

Back Button P89LPC954 Datasheet HTML 31Page - NXP Semiconductors P89LPC954 Datasheet HTML 32Page - NXP Semiconductors P89LPC954 Datasheet HTML 33Page - NXP Semiconductors P89LPC954 Datasheet HTML 34Page - NXP Semiconductors P89LPC954 Datasheet HTML 35Page - NXP Semiconductors P89LPC954 Datasheet HTML 36Page - NXP Semiconductors P89LPC954 Datasheet HTML 37Page - NXP Semiconductors P89LPC954 Datasheet HTML 38Page - NXP Semiconductors P89LPC954 Datasheet HTML 39Page - NXP Semiconductors Next Button
Zoom Inzoom in Zoom Outzoom out
 35 / 69 page
background image
P89LPC952_954_4
© NXP B.V. 2008. All rights reserved.
Product data sheet
Rev. 04 — 24 July 2008
35 of 69
NXP Semiconductors
P89LPC952/954
8-bit microcontroller with 10-bit ADC
stop bit is not saved. The baud rate is programmable to either 1
⁄
16 or
1
⁄
32 of the CPU clock
frequency, as determined by the SMOD1 bit in PCON. The SMOD1 bit controls the Timer
1 output rate available to both UARTs.
7.19.4 Mode 3
11 bits are transmitted (through TXDn) or received (through RXDn): a start bit (logic 0), 8
data bits (LSB first), a programmable 9th data bit, and a stop bit (logic 1). In fact, Mode 3 is
the same as Mode 2 in all respects except baud rate. The baud rate in Mode 3 is variable
and is determined by the Timer 1 overflow rate or the Baud Rate Generator (described in
Section 7.19.5 “Baud rate generator and selection”).
7.19.5 Baud rate generator and selection
Each enhanced UART has an independent Baud Rate Generator. The baud rate is
determined by a baud-rate preprogrammed into the BRGR1_n and BRGR0_n SFRs
which together form a 16-bit baud rate divisor value that works in a similar manner as
Timer 1 but is much more accurate. If the baud rate generator is used, Timer 1 can be
used for other timing functions.
The UARTs can use either Timer 1 or their respective baud rate generator output (see
Figure 8). Note that Timer T1 is further divided by 2 if the SMOD1 bit (PCON.7) is cleared.
The independent Baud Rate Generators use OSCCLK.
7.19.6 Framing error
Framing error is reported in the status register (SnSTAT). In addition, if SMOD0 (PCON.6)
is ‘1’, framing errors can be made available in SnCON.7 respectively. If SMOD0 is ‘0’,
SnCON.7 is SM0_n. It is recommended that SM0_n and SM1_n (SnCON.7:6) are set up
when SMOD0 is ‘0’.
7.19.7 Break detect
Break detect is reported in the status register (SnSTAT). A break is detected when
11 consecutive bits are sensed LOW. The break detect can be used to reset the device
and force the device into ISP mode.
7.19.8 Double buffering
The UART has a transmit double buffer that allows buffering of the next character to be
written to SnBUF while the first character is being transmitted. Double buffering allows
transmission of a string of characters with only one stop bit between any two characters,
as long as the next character is written between the start bit and the stop bit of the
previous character.
Fig 8.
Baud rate sources for UART (Modes 1, 3)
baud rate modes 1 and 3
SBRGS = 1
SBRGS = 0
SMOD1 = 0
SMOD1 = 1
timer 1 overflow
(PCLK-based)
baud rate generator
(CCLK-based)
002aaa897
÷2



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69


bảng dữ liệu tải về

Go To PDF Page


Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ] 

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com