| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
7721 bảng dữ liệu(PDF) 292 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
7721 bảng dữ liệu(HTML) 292 Page - Renesas Technology Corp |
|
292 / 577 page ![]() 7721 Group User’s Manual 13-13 DMA CONTROLLER Register Mode Maintains the transfer start address of the source. 13.2 Block description Single transfer mode Repeat transfer mode Array chain transfer mode SARi DARi Indicates the transfer source address of the data to be transferred next. SARi SARi latch DARi Indicates the transfer destination address of the data next to be transferred DARi latch Indicates the start address of the transfer parameter memory of the next block. Maintains the transfer start address of the destination. (Not used) TCRi Indicates the number of remaining bytes of the block under transfer. TCRi TCRi latch Table 13.2.5 Functions of SARi, DARi, and TCRi Maintains the byte number of the transfer data. Indicates the number of remaining blocks. (Not used) Link array chain transfer mode (Not used) (Note) Note: Any value other than 0 (00000116–FFFFFF16) must be written before DAM transfer. 13.2.7 Incrementer/Decrementer The incrementer/decrementer is a 24-bit register. After every 1-unit transfer, that increments (adds) or decrements (subtract) the contents of SARi and DARi. Table 13.2.6 lists the increment/decrement values. Table 13.2.6 Increment/Decrement values Transfer unit 8 bits 16 bits Address directions Forward Backward + 1 – 1 + 2 – 2 13.2.8 Decrementer The decrementer is a 24-bit register. After every 1-unit transfer, that decrements the contents of TCRi by 1 when the transfer unit is 8 bits, and by 2 when 16 bits. In the array chain transfer mode, every time a transfer parameter is read, the contents of the TCRi latch are also decremented by 1. 13.2.9 DMA latch The DMA latch is a 16-bit latch. In 2-bus cycle transfer mode, the DMA latch maintains the value read from the transfer source memory with a read cycle until this value is written into the transfer destination memory. In 1-bus cycle transfer mode, the DMA latch is used to copy data. For copy, refer to section “13.4.2 1-bus cycle transfer.” |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |