DP80390 datasheet(19/84 Pages) DCD

19 / 84 page

DP80390 Instructions set details

- 19 -

All trademarks mentioned in this document

http://www.DigitalCoreDesign.com

are trademarks of their respective owners.

http://www.dcd.pl

3.3.

ADDC

Instruction:

ADDC A, < src-byte>

Function:

Adds A and the source operand, then adds one (1) if CY is set, and

puts the result in A.

Description:

ADDC simultaneously adds the byte variable indicated, the carry flag

and the accumulator contents, leaving the result in the accumulator.

The carry and auxiliary carry flags are set, respectively, if there is a

carry out of bit 7 or bit 3, and cleared otherwise. When adding unsigned

integers, the carry flag indicates an overflow occurred. OV is set if there

is a carry out of bit 6 but not out of bit 7, or a carry out of bit 7 but not

out of bit 6; otherwise OV is cleared. When adding signed integers, OV

indicates a negative number produced as the sum of two positive

operands or a positive sum from two negative operands. Four source

operand-addressing modes are allowed: register= direct, register-

indirect, or immediate.

3.3.1. ADDC A, RN

Operation:

(PC)

← (PC) + 1

(A)

← (A) + (C) + (Rn)

Bytes:

Cycles:

Encoding:

3.3.2. ADDC A, DIRECT

Operation:

(PC)

← (PC) + 2

(A)

← (A) + (C) + (direct)

Bytes:

Cycles:

Encoding:

direct address

DP80390 bảng dữ liệu(PDF) 19 Page - Digital Core Design

DP80390 bảng dữ liệu(HTML) 19 Page - Digital Core Design

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84

bảng dữ liệu tải về

Link URL