ST72511R datasheet(76/164 Pages) STMICROELECTRONICS

76 / 164 page

ST72311R, ST72511R, ST72512R, ST72532R

76/164

16-BIT TIMER (Cont’d)

STATUS REGISTER (SR)

Read Only

Reset Value: 0000 0000 (00h)

The three least significant bits are not used.

Bit 7 = ICF1

Input Capture Flag 1.

0: No input capture (reset value).

1: An input capture has occurred on the ICAP1 pin

or the counter has reached the OC2R value in

PWM mode. To clear this bit, first read the SR

IC1R (IC1LR) register.

Bit 6 = OCF1

Output Compare Flag 1.

0: No match (reset value).

1: The content of the free running counter has

matched the content of the OC1R register. To

clear this bit, first read the SR register, then read

or write the low byte of the OC1R (OC1LR) reg-

ister.

Bit 5 = TOF

Timer Overflow Flag.

0: No timer overflow (reset value).

1: The free running counter rolled over from FFFFh

to 0000h. To clear this bit, first read the SR reg-

ister, then read or write the low byte of the CR

(CLR) register.

Note: Reading or writing the ACLR register does

not clear TOF.

Bit 4 = ICF2

Input Capture Flag 2.

0: No input capture (reset value).

1: An input capture has occurred on the ICAP2

pin. To clear this bit, first read the SR register,

then read or write the low byte of the IC2R

(IC2LR) register.

Bit 3 = OCF2

Output Compare Flag 2.

0: No match (reset value).

1: The content of the free running counter has

matched the content of the OC2R register. To

clear this bit, first read the SR register, then read

or write the low byte of the OC2R (OC2LR) reg-

ister.

Bit 2-0 = Reserved, forced by hardware to 0.

INPUT CAPTURE 1 HIGH REGISTER (IC1HR)

Read Only

Reset Value: Undefined

This is an 8-bit read only register that contains the

high part of the counter value (transferred by the

input capture 1 event).

INPUT CAPTURE 1 LOW REGISTER (IC1LR)

Read Only

Reset Value: Undefined

This is an 8-bit read only register that contains the

low part of the counter value (transferred by the in-

put capture 1 event).

OUTPUT

COMPARE

HIGH

(OC1HR)

Read/Write

Reset Value: 1000 0000 (80h)

This is an 8-bit register that contains the high part

of the value to be compared to the CHR register.

OUTPUT

COMPARE

LOW

(OC1LR)

Read/Write

Reset Value: 0000 0000 (00h)

This is an 8-bit register that contains the low part of

the value to be compared to the CLR register.

ICF1

OCF1

TOF

ICF2

OCF2

MSB

LSB

MSB

LSB

MSB

LSB

MSB

LSB

ST72511R bảng dữ liệu(PDF) 76 Page - STMicroelectronics

ST72511R bảng dữ liệu(HTML) 76 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL