DP-100

10

Connector attached cable

Panel mounting bracket, Front protection cover

MS-DP1-2

MS-DP1-3

Flat attachment

MS-DP1-FM

MS-DP1-FR

MS-DP1-FN

MS-DP1-FE

MS-DP1-4

Recommended connector

Contact: SPHD-001T-P0.5, Housing: PAP-04V-S

(Manufactured by J.S.T. Mfg. Co., Ltd.)

Note: Contact the manufacturer for details of the recommended products.

Recommended crimping tool

Model No.: YC-610R

(Manufactured by J.S.T. Mfg. Co., Ltd.)

Note: Contact the manufacturer for details of the recommended products.

OPTIONS

M8 connector attached cable

MS-DP1-5

ø9

ø0.354

(Unit: mm in)

31.4

1.236

ø4

ø0.157

Note: The connector attached cable CN-14A-C2 is supplied with the DP-100 series.

(Excluding M8 plug-in connector type).

Sensor mounting bracket

MS-DP1-1

Conversion bushing

MS-DP1-7

Sensor mounting

brac et

MS-DP1-1

M3 (length 6 mm 0.236 in)

screws with washers

Accessory for

MS-DP1-1

()

Front protection cover

MS-DP1-3

Panel mounting brac et

MS-DP1-2

DP-100

Panel mounting brac et MS-DP1-4

DP2

-20

ñ101.3

kPa

OU

T2

OU

T1

MODE

0-A

DJ

DP2

/ DP3

Insert

Remove

Remove

Mounting holes

for DP2 / DP3 series

can be used as is.

Front protection cover

DPX-04

(optional)

can be installed on

MS-DP1-4

.

Sensor mounting

brac et

MS-DP1-5

M3 (length 6 mm 0.236 in)

screws with washers

Accessory for

MS-DP1-5

()

MS-DP1-FM

15g approx.

MS-DP1-FR/FN/FE

25g approx.

Net weight:

Two M3 (length 8 mm 0.315 in) screws,

two M4 (length 20 mm 0.787 in) screws are attached.

Conversion bushing

MS-DP1-7

M5 female

thread

Rc1/8 female

thread

Connector

attached cable

Connector

attached cable

(Flexible cable)

M8 connector

attached cable

Connector

Panel mounting

brac et

Front protection

cover

Conversion

bushing

Flat

attachment

Sensor

mounting

brac et

Length: 1 m 3.281 ft

Length: 2 m 6.562 ft

Length: 3 m 9.843 ft

Length: 5 m 16.404 ft

Length: 1 m 3.281 ft

Length: 2 m 6.562 ft

Length: 3 m 9.843 ft

Length: 5 m 16.404 ft

Length: 2 m 6.562 ft

Length: 5 m 16.404 ft

Set of 10 housings and 40 contacts

Model No.

Designation

Description

CN-14A-C1

CN-14A-C2

(Note)

CN-14A-C3

CN-14A-C5

CN-14A-R-C1

CN-14A-R-C2

CN-14A-R-C3

CN-14A-R-C5

CN-24A-C2

CN-24A-C5

CN-14A

MS-DP1-1

MS-DP1-5

MS-DP1-2

MS-DP1-4

MS-DP1-3

MS-DP1-7

MS-DP1-FM

MS-DP1-FR

MS-DP1-FN

MS-DP1-FE

0.2 mm2 4-core cabtyre cable with

connector on one end

Cable outer diameter: ø3.7 mm ø0.146 in

0.2 mm2 4-core flexible cabtyre cable

with connector on one end

Cable outer diameter: ø3.7 mm ø0.146 in

For M8 plug-in connector type

The connector on one end

Cable outer diameter: ø4 mm ø0.157 in

Allows sensors to be installed on the flooring or ceiling.

Multiple sensors can also be mounted closely.

Allows sensors to be installed on the wall. Multiple sensors

can also be mounted closely.

Allows installation to panels with thic ness of 1 to 6 mm 0.039

to 0.236 in. Multiple sensors can also be mounted closely.

Allows replacement from DP2 / DP3 series to DP-100 series. For newly designed

set-up, please use panel mounting brac et MS-DP1-2 for panel mounting.

Protects the adjustment surfaces of sensors.

(Can be attached when using the panel mounting brac et)

Pressure port and cable can now be

pulled out in downward, left or right

directions. Flat mounting on surfaces

such as the wall is made possible.

By equipping with DP-10 -M(-P), pressure port can be converted to

Rc1/8 female thread. Replacement from DP2 / DP3 series is possible.

M5 female thread

Rc1/8 female thread

NPT1/8 female thread

G1/8 female thread