Details

copied

Details transmitted

Details received

3

Copy function reduces man-hours and human error

Sensors can be connected to a master sensor one by one, and a copy of the setting details for the master sensor can be transmitted as data

to other sensors. If making the same settings for multiple sensors, this prevents setting errors among other sensors and in addition, when

machinery design are changed, there would be less change in work orders.

Copy function helps operation to be accurate and quick

Setting details can be copied.

+V

0 V

Comparative

output 1

Comparative

output 2

+V

0 V

Comparative

output 1

Comparative

output 2

Power supply

Slave sensor

Master sensor

Note: Settings cannot be copied from the new version (Ver. 2) to the old version.

However, settings can be copied from the old version to the new version (Ver. 2).

Copying via wiring

5 minutes

approx.

Sensor setting time:

5 minutes 20 seconds approx.

Sensor setting time:

20 seconds approx.

Setting man-hours are reduced and sensor setting time is shortened.

1

Advantage

5 minutes

approx.

5 minutes

approx.

5 minutes

approx.

5 minutes

approx.

Sensor setting time:

20 minutes approx.

1st equipment:

Master

sensor

1st equipment:

2nd equipment:

3rd equipment:

4th equipment:

2nd equipment:

3rd equipment:

4th equipment:

Previously

DP-100, 1st line

DP-100, 2nd line

20 seconds

approx.

1st equipment:

2nd equipment:

3rd equipment:

4th equipment:

20 seconds

approx.

Number of pressure sensor: 1 unit per 1 equipment, 4 equipment per 1 line

Human operating error is reduced.

2

Advantage

The setting details for the master sensor are

retained, so continuous copying is possible.

For 2nd and subsequent lines, the data

transmission time only is required.

Because all details are copied automatically, problems as a result of human error can be

prevented.

Instruction manuals can be updated easily when changes are made to equipment design.

Reduction

of lead time