CN-14A-R-C2 datasheet(6/20 Pages) PANASONIC

6 / 20 page

Full range of performance and functions in a compact body

Notes: 1) Hysteresis can be fixed to one of eight different levels.

2) “

” or “

” appears in the sub display for comparative

output 1, and “

” or “

” appears for comparative output 2.

Note: “

” or “

” appears in the sub display for comparative

output 1, and “

” or “

” appears for comparative output 2.

For low

pressure

For high

pressure

All lineup models are compound pressure

types

No sensor settings are required to switch between positive pressure

and negative pressure, so that the number of registered part

numbers can be decreased.

High performance accomplished

The low pressure type displays measurements in 0.1 kPa at a

resolution of 1/2,000 and has a response time of 2.5 ms (variable up

to 5,000 ms), ±0.5 % F.S. temperature characteristics and ±0.1 %

F.S. repeatability, achieving high detection performance.

Ideal for applications such

as suction. No mis-

operations due to vacuum

breakdown occur.

Equipped with independent dual output

Equipped with two independent comparative outputs, and separate

sensing modes can be selected for each of them. Since there are

two comparative outputs, one of the comparative outputs can even

be used for alarm output. In addition, output, which is not being

used, can be disabled.

This mode is used for comparative output ON / OFF control.

EASY mode

H (Hysteresis)

H: Fixed

OFF

Comparative output

OFF

Comparative output

H (Hysteresis)

H: 1 digit or more

H (Hysteresis)

H: Fixed

H (Hysteresis)

Comparative output

OFF

This mode is used for setting comparative output ON and OFF

at pressures within the setting range.

Window comparator mode

Notes: 1) Hysteresis can be fixed to one of eight different levels.

2) “

” appears in the sub display for comparative output 1,

and “

” appears for comparative output 2.

This mode is used for setting comparative output hysteresis to

the desired level and for carrying out ON / OFF control.

Hysteresis mode

Low pressure type

Standard type

DP-101

DP-102

– 100 kPa

100 kPa

1 MPa

0 kPa

Ideal for applications such

as checking reference

pressure. Can also be used

for simple suction.

Resolution: 1/2,000

Response time: 2.5 ms

Temperature characteristics: ±0.5 % F.S.

Repeatability: ±0.1 % F.S.

Vacuum breakdown can also be notified during

suction applications!

Reference pressure alarm output is possible during

reference pressure checking!

Comparative output 1

EASY mode

Comparative output 2

EASY mode

OFF

– 100 kPa

0 kPa

P-1

0 kPa

P-2

Vacuum breakdown checking

Suction checking

Comparative output 1

Hysteresis

mode

Comparative output 2

EASY mode

OFF

Lo-1

Hi-1

P-2

Reference

pressure

checking

Alarm output

Displays measurements in 0.1 kPa

Three output modes are suitable for a wide

range of applications

CN-14A-R-C2 bảng dữ liệu(PDF) 6 Page - Panasonic Semiconductor

CN-14A-R-C2 bảng dữ liệu(HTML) 6 Page - Panasonic Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

bảng dữ liệu tải về

Link URL