10

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

3. DO NOT attempt to adjust or tamper with the ram assembly. There are no user-

serviceable parts. Contact your Clarke service department for any servicing.

4. Check the castors to ensure they move freely without undue wear to their spindles

and that the wheels are not cracked or damaged.

5. Remove any rust and repaint to prevent further corrosion.

6. Ensure that all warning labels are in place and clearly legible.

HYDRAULIC OIL

If any leakage is observed, it may be

necessary to top up the hydraulic oil as

follows.

1. Lower the jib to its lowest position,

and remove the bolt that joins the

ram to the jib. This will allow the ram

to fully retract and give access to the

plug.

2. Remove the filler plug from the side

of the ram and top up the oil until it is

level with the hole. Replace the filler

plug.

NOTE: Top up using Clarke hydraulic

oil (part number 3050830). Do

not mix different types of oil.