169 / 242 page
Removal and Replacement
TDS 310, TDS 320 & TDS 350 Instruction Manual
811
Fuse
Figure 83:Line Fuse Removal
7. Reinstallation: Do in reverse steps 6 through 3 to reinstall the line fuse
and then the line cord.
1. Have handy a pair of angledtip tweezers (Item6).
2. Set the oscilloscope so its bottomis down on the work surface and its
front is facing you.
3. Refer to Figure 84. Grasp any knob you wish to remove and pull it
straight out fromthe front panel slightly to create some clearance
between the base of the knob and the front panel.
4. Insert the tweezers between the knob and front panel and use themto
remove the knob and its shaft.
5. Pull the shaft out of the knob to remove.
Front Panel Knobs
and Shafts
Vietnamese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
