167 / 242 page
Removal and Replacement
TDS 310, TDS 320 & TDS 350 Instruction Manual
89
Table83:Tools Required for Module Removal (Cont.)
Item
No.
Description
Name
5
Nut driver, 5/16 inch
Used for removing earth ground
cables.
6
Angletip tweezers
Used for knoband shaft removal.
7
SlipJaw Pliers
Used for removing the front feet from
the cabinet.
8
Wooden Spudger
Used for front EMI gasket removal.
9
Front Cover
This optional accessory protects the
front of the oscilloscope when posi
tioned face down in the removal pro
cedures.
10
Gloves, lint free, cloth
Used for removing the menu elasto
mer and menu button flex circuit.
WARNING
To avoid injury or death, unplug the line cord from the line voltage
power source before continuing.
1. Have handy a flat bladed screwdriver (Item 4).
2. Set the oscilloscope so its bottom is down on the work surface and its
rear is facing you.
Line Fuse and Line
Cord
Vietnamese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
